corner curtain rod

corner curtain rod

When making a pleated valance, we first suggest that a pattern be made on paper. Six inches should be allowed for each pleat with space between each pleat of eight inches in width. Let's assume, for example, that a valance is to be made into five pleats. It will be necessary to allow 30" for the pleats. There are to be 6 spaces between the pleats of 8" each, making a total of 48".

The material needed at the two ends to turn the corners and reach the window trim should be at least 4" on each end, making 8" for two turnbacks. Add 1/2" at each end for hems, making 1" additional. The total width of material needed is 30" plus 48" plus 8" plus 1" = 87". When the pleats are drawn together, as indicated in the illustration, the final width of the valance is 57". The valance may be made smaller or larger by reducing or increasing the spaces between the pleats.

Most materials are not sufficiently wide for valances and have to be pieced. If a valance board is not used the 4" for the turn-backs at the sides will not he necessary. In the latter case an inch or two on each side may he turned under or cut off, according to the width of the window or the inside corner blocks.

Valance boards should be about 4 inches wide and long enough to come to the edge of the window casing. The top of the valance board should be on the level with the upper edge of the window trim or casing. For a well finished effect, the board should be covered with lining similar to that used to line the material. The valance is then tacked on to the edge of the valance board.

If a curtain rod is to be used for the valance, triple rods may be purchased. The inner rod to be used for the glass curtains, the middle one for the over-draperies and the outside one for the valance. Valances may be attached to the curtain rod. Hooks are sewed on the back into the pleats when the pleats are being made. Extra hooks may be placed between the pleats which help to keep the heading upright. Rings are sometimes used instead of hooks and they are slipped over the rod.

After the paper pattern is completed, we would suggest cutting a model out of muslin or other cheap material, pin the pleats in place, try the model at the window to see how it fits and at the same time determine its height. The height of the valance is determined by the height of the window.

A good general proportion to follow is to make the valance one-sixth of the height of the curtain treatment. If the window is six feet and the curtains stop at the window apron, the valance should be twelve inches deep. If, however, the curtains go to the floor, the average height of a window from the top of the window casing to the floor is 9 feet, making the valance in this case 18" deep.

The valance is lined by placing the right side of the lining and material together, cutting the lining so it extends 1/2" beyond the material at the bottom. Stitch across the top and at the sides. Turn the valance inside out so that the wrong sides are together and baste across the lower edge, 1/2" lining showing beyond the edge of the bottom of the material.

If a fringe or other edging is to be used, it is placed underneath next to the lining upside down so that the top edge of the fringe is even with the edge of the lining and will not be noticeable against any wood corner blocks. With the fringe and lining in position, stitch together, then turn the edge of the lining and fringe up over the front edge of the material and sew neatly together for these stitches will show on the back and front. Remove the basting threads that are left.

To make the pleats, draw the material together as indicated on the pattern where 6" has been allowed for each pleat and baste together. The fold is then made into a box pleat or pinch pleat. A pinch pleat is made by gathering the 0" fold together and dividing it into three small folds and sewing the three folds securely in place.

A box pleat is made by drawing the material together and getting the effect of a straight pleat as shown in the illustrations previously referred to. For making shaped valances, it is advisable to first make a paper pattern and place it in position in order to study its lines and proportions. For accuracy fold the paper in the middle and draw half of the design. Cut the other half by it.

KOHLER K-9702-CP Corner Curtain Rod, Polished Chrome
KOHLER K-9702-CP Corner Curtain Rod, Polished Chrome
List Price: $228.70
Sale Price: $148.75
You save: $79.95 (35%)
  Eligible for free shipping!
Availability: Usually ships in 24 hours
See Reviews For This Product

Description

K-9702-CP Originally designed to be integrated with the Mayflower baths, this corner curtain rod creates a space-saving corner bath. Constructed of 17 gauge brass, the rod is durable and reliable. Simplistic lines allow this piece to complement any existing home d cor. Features: -Available in the following finishes: polished chrome -Corresponds with Mayflower Baths -Constructed of 17 gauge brass

Features

  • Corner curtain rod
  • Constructed of 17-gauge brass
  • Solid brass construction for durability and reliability
  • For use with Mayflower bath
60
60" x 26" Chrome L Corner Shower Rod includes Ceiling Support and Wall Mounts
Sale Price: $105.00
  Eligible for free shipping!
Availability: Usually ships in 1-2 business days
See Reviews For This Product

Description

60" x 26" Polished Chrome L shaped Shower Curtain Rod. Perfect for use with your free standing tub, clawfoot tub, or as a shower enclosure. Includes adjustable cut to fit ceiling support and 2 wall mounts so it's ready to install. The rod can also be cut to fit. Matching bath accessories and faucets available in our YouRemodel storefront. Please contact us if you have any questions.

Features

  • 60" x 26"
  • 1" Solid Brass Tubing with Chrome Plate
  • 36" Adjustable Ceiling Support (cut to fit)
  • Includes 2 Wall Flange Mounts
  • Shower Rod can be cut to fit
Bendable Shower Curtain Rod, Chrome Finish
Bendable Shower Curtain Rod, Chrome Finish
Sale Price: $66.50
  Eligible for free shipping!
Availability: Usually ships in 1-2 business days
See Reviews For This Product

Description

Complete freedom to shape the curtain rod to whatever need and situation you might have - Half-round, D-shape, Neo-angle, Free-form. Innovative track design where the shower curtain can move freely along the rod without interference of the ceiling supports. Injection molded wall flanges and 24 curtain hooks/gliders included as well as fasteners. With a total length of almost 10' of curtain rod you can easily cut it down to fit a smaller shower/tub area. The ceiling support / profile couplers connect the profile sections anywhere along a straight section of the curtain rod. Detailed, easy to follow illustrated installation instructions included.

Features

  • Flexible Shower Curtain Rod - can be bent to fit any area
  • Dual channel continuous track aluminum profile, curtain will move freely along curtain rod
  • Includes two 20" ceiling support (cut to fit), wall mounts and curtain hooks
  • Curtain profile clear lacquered aluminum, chrome plated injection molded wall mounts and gray curtain hooks
  • 3 ea. 40" curtain rod sections (total length almost 10 feet)
Sierra Tools JT1851 Set of 4 Curtain Rod Holders
Sierra Tools JT1851 Set of 4 Curtain Rod Holders
Sale Price: $7.76
  Eligible for free shipping!
Availability: Usually ships in 24 hours
See Reviews For This Product
Maytex Adjustable Curved Shower Rod, Chrome
Maytex Adjustable Curved Shower Rod, Chrome
Sale Price: $24.99
  Eligible for free shipping!
Availability: Usually ships in 24 hours
See Reviews For This Product

Description

Our adjustable curved rod will give you more room in the shower/tub area. Made of sturdy metal, permanent fixture to the wall, and curved design fits standard size 5' tub/showers.

Features

  • Chrome
  • Wipe with damp cloth
  • Adjustable length
Corner Shower Rod, Track Style, 67
Corner Shower Rod, Track Style, 67"x36" Alt. 40"x63", Clear Finish
Sale Price: $52.50
  Eligible for free shipping!
Availability: Usually ships in 1-2 business days
See Reviews For This Product

Description

Innovative track design where the shower curtain can move freely along the rod without interference of the ceiling support. Injection molded wall flanges and curtain hooks/gliders included.

Features

  • 67"x36" alt. 40"x63" (cut to fit) Corner Shower Curtain Rod
  • Dual channel continuous track aluminum profile
  • Includes 21" ceiling support (cut to fit), wall mounts and curtain hooks
  • Rod clear anodized aluminum finish, wall mounts chrome plated
Zenith 34941 Hoop Shower Rod, White
Zenith 34941 Hoop Shower Rod, White
List Price: $70.10
Sale Price: $42.21
You save: $27.89 (40%)
  Eligible for free shipping!
Availability: Usually ships in 24 hours
See Reviews For This Product

Description

34941 Features: -Hoop shower rod. -Attaches to the wall and ceiling above free standing tub.

Features

  • For free standing bathtubs, 1 inch diameter rod attaches to the wall and ceiling.
  • Perfect for old fashioned claw-foot bathtubs.
  • Includes mounting hardware
Bendable Shower Curtain Rod, White Finish
Bendable Shower Curtain Rod, White Finish
Sale Price: $66.50
  Eligible for free shipping!
Availability: Usually ships in 1-2 business days
See Reviews For This Product

Description

Complete freedom to shape the curtain rod to whatever need and situation you might have - Half-round, D-shape, Neo-angle, Free-form. Innovative track design where the shower curtain can move freely along the rod without interference of the ceiling supports. Injection molded wall flanges and 24 curtain hooks/gliders included as well as fasteners. With a total length of almost 10' of curtain rod you can easily cut it down to fit a smaller shower/tub area. The ceiling support / profile couplers connect the profile sections anywhere along a straight section of the curtain rod. Detailed, easy to follow illustrated installation instructions included.

Features

  • Flexible Shower Curtain Rod - can be bent to fit any area
  • Dual channel continuous track aluminum profile, curtain will move freely along curtain rod
  • Includes two 20" ceiling support (cut to fit), wall mounts and curtain hooks
  • Curtain profile white lacquered aluminum, white injection molded wall mounts and curtain hooks
  • 3 ea. 40" curtain rod sections (total length almost 10 feet)
Corner Shower Curtain Rod (72
Corner Shower Curtain Rod (72" x 48" / 36" Ceiling Support) - Oil Rubbed Bronze
See Reviews For This Product

Description

This sturdy corner shower curtain rod is great for situations when the ordinary shower curtain rod is too short. Comes with one ceiling support. Available in several finishes. 1" OD brass tubing. Rod is 72" x 48". Rods adjustable by cutting ends. Custom cut this rod at installation time. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Packed in individual carton with two jumbo style rectangular flanges. Includes one 36" ceiling support. Supports for sloped ceilings available. See below. For extra support, order a second ceiling support. (Sold separately, at bottom of this page) See related items below for curtains, hooks and supports. Available in finishes listed below. Ship within 2 business days. Please call our office for larger custom L rods.

Levolor Swivel Socket, Satin Nickel, Use With Rods Up To 1-Inch Diameter
Levolor Swivel Socket, Satin Nickel, Use With Rods Up To 1-Inch Diameter
Sale Price: $14.99
  Eligible for free shipping!
Availability: Usually ships in 24 hours
See Reviews For This Product

Features

  • Adjustable from 90 to 180 degrees.
  • Can be used with Levolor 1-inch drapery rods.
  • Available in two popular finishes
  • Premium metal construction; finished with a durable metal plating for long lasting beauty
  • Easy to Install
Share and Enjoy:
  • Print
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • Blogplay